
SEBO Power Head Comparison Guide
Welcome to our in-depth guide on SEBO’s range of electric power heads. Known for engineering high-performance vacuums with precision and innovation, SEBO offers a variety of power head options designed to suit upright, canister, and central vacuum systems. In this blog, we’ll take a closer look at the features, functionality, and compatibility of SEBO’s ET series power heads.
What is a Power Head?
A power head - also known as a power nozzle or motorized brush - is a key tool for deep-cleaning carpets. It attaches to the base of the vacuum and uses a spinning brush roller to agitate carpet fibers, loosening dirt, dust, and pet hair so the vacuum can easily suck it all up. Power heads are especially helpful in high-traffic areas or homes with pets, where dirt tends to get embedded deep in the carpet.
Key Features of SEBO ET Power Heads
SEBO’s ET power heads are electric, motor-driven units designed for powerful, efficient cleaning. Built in Germany, they combine performance with durability and thoughtful features:
-
Electric motor-driven brush roll: Delivers consistent agitation for deep carpet cleaning, even on dense or high-pile carpets
-
4-level manual height adjustment: Lets you raise or lower the brush roll depending on your floor type - ideal for switching between thick carpet and hard flooring
-
Swivel neck design: Allows for precise, ergonomic steering around furniture and tight corners
-
Automatic shut-off with warning lights: Protects the motor and brush roll by stopping operation if something gets tangled, like a sock or shoelace
-
Easy brush roll maintenance: The brush roll can be removed in seconds for cleaning or replacement - no tools required
- Versatile floor use: Although designed with carpets in mind, the lowest height setting allows for gentle cleaning on hard floors too
These power heads are built to last and easy to use - perfect for homes that need powerful, reliable floor care.
The differences between the SEBO power heads
While all SEBO ET power heads share the key features mentioned above, they differ when it comes to size and connection style.
Here’s how they vary:
ET-1 vs. ET-2
- ET-1 models are 12 inches wide
- ET-2 models are 15 inches wide
Both are designed for deep carpet cleaning, but the wider ET-2 is ideal for larger spaces.

F1 vs. F2 Configuration
- These versions are designed to fit central vacuum systems
- Both have a universal neck diameter of 1 1/4-inch and an external power cord for compatibility with most central vacuum brands
- The difference between F1 and F2 is the cord length - the F1 cord length is 46-inches, designed to give extra reach for hose handles with the plug positioned at the rear. The F2 cord length is 37-inches, designed to reach hose handles with the plug located underneath (as illustrated below).

All SEBO Canada Power Heads
ET-1 power head
The SEBO ET-1 power head comes with all SEBO premium canister vacuums, the SEBO Felix and Dart upright vacuums, and the SEBO deluxe and premium central vacuum kits. It features a power cord connection at the back of the neck, designed specifically for use with SEBO electric wands that have an integrated cord.
Cleaning width:
- 12 inches
Neck configuration:
- 38mm SEBO-specific neck diameter
SEBO product compatibility:
Central vacuum unit compatibility:
- If purchased as part of a SEBO deluxe or premium central vacuum kit, then it is compatible with all central vacuum units that have a universal 1 1/4-inch diameter. This is because the wand tapers from the 38mm diameter of the power head, to the 1 1/4-inch diameter of the hose.
- Otherwise, if purchased outside of a kit, it will only be compatible with a central vacuum unit if paired with the SEBO Central Vacuum Electric Telescopic Wand. The central vacuum unit must have a diameter of 1 1/4-inch and the cord connection port needs to be under the handle (as shown above) to ensure the electric wand can plug into it.
Colour options:
Made for those that prefer a wider 15-inch working width. Like the ET-1, it features a power cord connection at the back of the neck, designed specifically for use with SEBO electric wands that have an integrated cord.
Cleaning width:
- 15 inches
Neck configuration:
- 38mm SEBO-specific neck diameter
SEBO product compatibility:
Central vacuum unit compatibility:
- If purchased as part of a SEBO deluxe or premium central vacuum kit, then it is compatible with all central vacuum units that have a universal 1 1/4-inch diameter. This is because the electric wand included in the kit tapers from the 38mm diameter of the power head, to the 1 1/4-inch diameter of the hose.
- Otherwise, if purchased outside of a kit, it will only be compatible with a central vacuum unit if paired with the SEBO Central Vacuum Electric Telescopic Wand. The central vacuum unit must have a diameter of 1 1/4-inch and the cord connection port needs to be under the handle (as shown above) to ensure the electric wand can plug into it.
Included with:
Colour options:

ET-1 F1 power head
A SEBO power head designed exclusively for use with central vacuum units. It features a 46-inch integrated cord and a 1 1/4-inch diameter friction-fit neck. The 46-inch integrated cord is designed for central vacuum hose handles that have the cord plug positioned at the rear.
Cleaning width:
- 12 inches
Integrated cord length:
- 46 inches
Neck configuration:
- Standard 1 1/4-inch friction-fit neck - compatible with most central vacuum wands with the same diameter. Two built-in screws allow you to securely fasten the wand in place for a stable connection.
Please note: We do not recommend using this power head with button-lock wands as they may not attach securely. The button-lock mechanism can also trap dirt and debris, potentially causing a blockage in the neck.
SEBO product compatibility:
Central vacuum unit compatibility:
This power head is compatible with most central vacuum units, as long as the following requirements are met:
- The wand being attached is not electric, meaning it does not have an integrated cord.
- The wand has a 1 1/4-inch diameter and a friction-fit design (not a button-lock design).
- The hose has a cord connection port at the rear of the hose handle (as shown above). This is because the cord for this power head is 46 inches long to ensure the plug reaches the back of the hose handle.
We recommend purchasing the SEBO F1/F2 Telescopic Cord Management Wand to pair with it as it will securely clip the cord to the outside of the wand and is compatible with hose handles that have a 1 1/4-inch diameter.
Included with:
- This power head is only available for purchase on its own.
Colour options:
ET-1 F2 power head
A SEBO power head designed exclusively for use with central vacuum units. It features a 37-inch integrated cord and a 1 1/4-inch diameter friction-fit neck. The 37-inch integrated cord is designed for central vacuum hose handles that have the cord plug positioned underneath the hose handle.
Cleaning width:
- 12 inches
Integrated cord length:
- 37 inches
Neck configuration:
- Standard 1 1/4-inch friction-fit neck - compatible with most central vacuum wands with the same diameter. Two built-in screws allow you to securely fasten the wand in place for a stable connection.
Please note: We do not recommend using this power head with button-lock wands as they may not attach securely. The button-lock mechanism can also trap dirt and debris, potentially causing a blockage in the neck.
SEBO product compatibility:
Central vacuum unit compatibility:
- If purchased as part of the SEBO standard central vacuum kit then it is compatible with all central vacuum units that have a universal 1 1/4-inch diameter.
Otherwise, this power head is compatible with most central vacuum units, as long as the following requirements are met:
- The wand being attached is not electric, meaning it does not have an integrated cord.
- The wand has a 1 1/4-inch diameter and a friction-fit design (not a button-lock design).
- The hose has a cord connection port underneath the hose handle (as shown above). This is because the cord for this power head is 37 inches long to ensure the plug connects directly to the hose under the handle, without excess cord dangling.
We recommend purchasing the SEBO F1/F2 Telescopic Cord Management Wand to pair with it as it will securely clip the cord to the outside of the wand and is compatible with hose handles that have a 1 1/4-inch diameter.
Please note: The cord length will accommodate most wand lengths and hose handles, but if the power plug on the hose handle is located at the rear of the handle, or if the wands are longer than 38-inches, an F1 power head may be a better fit.
Included with:
Colour options:

ET-2 F1 power head
A SEBO power head designed exclusively for use with a central vacuum system. It features a 46-inch integrated cord and a 1 1/4-inch diameter friction-fit neck. The 46-inch integrated cord is designed for central vacuum hose handles that have the cord plug positioned at the rear.
Cleaning width:
- 15-inches
Integrated cord length:
- 46 inches
Neck configuration:
- Standard 1 1/4-inch friction-fit neck - compatible with most central vacuum wands with the same diameter. Two built-in screws allow you to securely fasten the wand in place for a stable connection.
Please note: We do not recommend using this power head with button-lock wands as they may not attach securely. The button-lock mechanism can also trap dirt and debris, potentially causing a blockage in the neck.
SEBO product compatibility:
- SEBO F1/F2 Telescopic Cord Management Wand
- SEBO F1 Power Head Basic Wand Set
- SEBO F2 Power Head Cord Management Wand Set
Central vacuum unit compatibility:
This power head is compatible with most central vacuum units, as long as the following requirements are met:
- The wand being attached is not electric, meaning it does not have an integrated cord.
- The wand has a 1 1/4-inch diameter and a friction-fit design (not a button-lock design).
- The hose has a cord connection port at the rear of the hose handle (as shown above). This is because the cord for this power head is 46 inches long to ensure the plug reaches the back of the hose handle.
We recommend purchasing the SEBO F1/F2 Telescopic Cord Management Wand to pair with it as it will securely clip the cord to the outside of the wand and is compatible with hose handles that have a 1 1/4-inch diameter.
Included with:
- This power head is only available for purchase on its own.
Colour options:
SEBO’s commitment to quality and versatility is clear in the thoughtful design of their ET power heads. With options tailored for upright, canister, and central vacuum systems, there's a solution to fit almost any cleaning setup.
By understanding the differences between models, you can choose the one that offers the best fit - and the best performance - for your home. The right SEBO ET power head can truly elevate your cleaning routine, delivering powerful, reliable results on both carpets and hard floors.